• image
  • image
  • image
  • image
  • image
  • image
  • image
  • image

DH-SM.15 > 1000 - 1500 Kg

The DH-SM.15 is the lightest of the conventional slider lifts with single fold platforms. It is equipped with a compact lift frame and short lift arms, in order to minimize the required overhang. As a consequence, it is a modern and lighter weight alternative to the short overhang lift DH-SMP.20 in 1500 kg execution, and forms the ideal weight saving lift for medium capacity trucks of 7,5 T GVW.

In its travel position, the DH-SM.15 is safely stored underneath the chassis of the vehicle. It is ideal for operations needing frequent fork lift loading or access to loading docks, and all applications requiring quick and free access to the cargo space.

  • Safely stored under the vehicle chassis. No damage when reversing into loading docks, or when loading or unloading with a fork lift. Free access to the cargo space.
  • Wedged platform. Level ride with automatic tilt at ground level. Adjustable platform orientation.
  • Electrical controls without sensitive electronic components
  • Lift frame in hot-dip zinc plated or “galvanised” finish. Best possible protection against corrosion [OAT104].
1500
Max Lifting Weight (Kg)
1
Guarantee (Years)

DH-SM.15 > Specifications

PLATFORM

  • Steel base section with aluminium point, or full aluminium platform [option OAP601]
  • Synthetic rollers for the contact between the platform and the ground
  • (Un)folding of the platform point reinforced by torsion springs [OAP613]

FUNCTIONAL & MECHANICAL CHARACTERISTICS

  • Conical / wedge platform. Level ride with automatic tilt at ground level
  • Platform tilt adjustable at any position from the exterior controls
  • Intelligent design offering maximum weight saving

HYDRAULICAL CHARACTERISTICS

  • 2 lift and 2 tilt cylinders for maximum platform stability
  • Electrical safety valves on all cylinders
  • Manual emergency operation on all electrovalves
  • Cylinder piston rods in hard-chromed stainless steel
  • Cylinders equipped with rubber gaitors and lubrication
  • Robust pump unit 12V or 24V DC mounted at the side of the lift frame
  • Hydraulic retraction by means of a hydromotor + gearwheel system [OAH022]

ELECTRICAL CHARACTERISTICS

  • Exterior control box with main battery isolator switch and removable key [OAE030.BT.0]
  • Electrical controls without sensitive electronic components
  • Safe exterior controls with compulsory 2-hand operation
  • Electric motor with thermal cut-out fuse

FITTING

  • Truck: aluminium sliding tubes with bolt-on mounting brackets for quick fitting to truck chassis
  • Compact lift frame and short lift arms for fitting in a short mounting space

FINISH & MAINTENANCE

  • Low-maintenance bearings in all articulation points, plus grease nipples
  • Lift frame in hot-dip zinc plated or “galvanised” finish. Best possible protection against corrosion [OAT104].
  • Steel base section standard in hot-dip zinc plated finish [OAT127]
  • Alu platform or platform sections in natural finish

The DH-SM.15 is one of the lightest conventional slider lifts featuring a single-fold platform produced by Dhollandia. The DH-SM.15 comes fitted with a compact lift frame and short lift arms as standard this minimizes the required overhang of the lift. This makes the slider lift a more contemporary and lightweight alternative to truck slider lifts such as the short overhang DH-SMP.20 slider lift. 

The DH-SM.15 has a maximum load capacity of 1500 kg coupled with its lightweight and four-cylinder setup with two of the four cylinders being used as lift cylinders and the remaining two being used as tilt cylinders it is clear that the DH-SM.15 is the perfect lightweight truck slider lift for medium-sized commercial vehicles with a gross vehicle weight of seven and a half tonnes.

When travelling the DH-SM.15 safely tucks away below the chassis of the commercial vehicle. The slider lift makes use of a hydraulic retraction system through the use of a hydro motor and gearwheel system. This makes the DH-SM.15 perfect for operations that frequently require loading and offloading via forklifts or access to loading docks while needing full access to your cargo.

Get a Quote